DRVB - Biconical Rotating Vacuum Dryer

DRVB Rotary Vacuum Dryer is suitable for gentle handling of dense powders and abrasive materials.
Drying is obtained with minimum shearstress in order to have gentle mixing and to control crystal size It is capable of handling large volumes and it’s easy to clean and it requires not much maintenance.
DRVB is carefully designed and manufactured according to the highest standard of quality and safety protection.

DRVB

Rotating Vacuum Dryer

  • Drying chamber double cone type
  • Jacket for heating/cooling
  • Mechanical seal not in contact with the product
  • Sanitary insulation
  • Cartridge filters on vacuum line for powder captation
  • Mucon valve for regulation of discharging
    		•
    Cartridge filters

    On vacuum line, inside the chamber, cartridge filters for vacuum aspiration are installed.

    The cartridge are made by multilayer sintered wire mesh which avoid release of metal particles.

    They can be easily cleaned also during drying by introduction of inert gas.
    Features

  • From 0,1 m3 to 4 m3 total standard size. The main dimension can be adjusted. Bigger or lesser capacity are available.
  • Austenitic stainless steel or nickel alloys
  • Internal and external finishing as required
  • Design and construction according GMP/FDA rules
  • Safety device and protection for all moving parts
  • Explosion proof electrical parts
  • Static and dynamic load
  • Technical documentation, installation, validation, start-up, commissioning, training
    		•
    Optional/Ancillaries:

  • Alternative construction material
  • CIP & SIP
  • Enclosure of drive unit with possibility of aspiration
  • Solvent recovery system
  • Vacuum unit
  • Heating/cooling system
  • Purging system
  • Platform
  • Control system
    		•
    p13.gif, 12 kB